3D FX Transfers
Product Info

Note: Please follow the instructions closely, as handling without proper care can damage the transfer, making it unfit for use.

Click here to see image with detailed directions.

How Do I Apply
Step 1: Peel off the plastic with the Transfer from transfer paper.
Step 2: Turn over and press the FX side on the adhesive transfer paper.
Step 3: Cut out the FX pieces to be used.
Step 4: Clean the skin making sure that it is free of any makeup, oil, hair or dirt.
Step 5: Peel the plastic from back of FX and press the exposed side of FX on the skin firmly.
Step 6: Using a wet cloth or sponge, soak the transfer paper. Peel off after 30 seconds.
Step 7: You can add blood or special FX makeup (sold separately) for additional effects.

How Do I Remove
Remove excess blood or makeup with warm water and a towel. Peel from an end and roll off the FX from skin. Remove any residue using an adhesive remover or baby oil. Cleanse skin with warm water and towel.

Temporary Tattoos
Product Info

How Do I Apply
Step 1: Clean the skin making sure that it is free of any makeup, oil, hair or dirt.
Step 2: Peel off the clear, protective sheet
Step 3: With the design facing down, press the tattoo firmly on the skin.
Step 4: Using a water-soaked towel, thoroughly wet the back of the tattoo for 30 seconds.
Step 5: Remove the paper backing.
Step 6: Slightly rinse the image with water.

How Do I Remove
Using rubbing alcohol or baby oil, thoroughly saturate the tattoo for about 10 seconds. Using a cotton ball, rub away from skin.

An alternative method is to use pieces of household tape to remove tattoo from dry skin.

Click to see detailed instructions.

FX Makeup
Product Info

How Do I Apply
Step 1: Thin makeup with water and apply with a brush.
Step 2: Tinsley FX Makeup dries quickly on application.

How Do I Remove
Tinsley FX Makeup can be removed by washing off with soap and water or with any makeup remover without any staining on skin.

Teeth FX
Product Info

Note: Please follow the instructions closely, as handling without proper care can damage the transfer, making it unfit for use.

How Do I Apply
Step 1: Carefully cut open the package and remove Teeth FX from packaging.
Step 2: FX teeth will be rigid. Soften the upper teeth by immersing in a bowl of hot water.
Step 3: After few seconds, remove FX teeth from hot water with a spoon.
Step 4: Notice that the FX teeth will be flexible now. Place the flexible, upper teeth into the mouth and fit to the curve of your upper teeth line.
Step 5: Let it cool for around 30 seconds. Remove from your mouth. The FX teeth will be rigid again.
Step 6: Customize the lower teeth using the same steps above. Pour the thermoplastic setting beads into the hot water.
Step 7: After couple of minutes, the color of beads will change from white to clear, which is signal that they can be used now. Remove half of the beads from hot water, using a spoon.
Step 8: Twist them into the shape of a 1 to 2 inch worm. Place the worm on the back of your teeth FX and push into place. Place the teeth FX into your mouth and bite down firmly on the soft plastic. Bite down firmly for about 2 minutes.
Step 9:  After the plastic cools, remove the teeth from mouth. Plastic would have become white again, with the custom impression of your teeth. Repeat the above for the lower teeth as well. Apply additional effects using FX blood or additional makeup (sold separately).

Big Mouth Kits
Product Info

Note: Please follow the instructions closely, as handling without proper care can damage the transfer, making it unfit for use.

How Do I Apply
Step 1: Remove tattoo sheet from the package.
Step 2: Cut around the tattoo close to it, being careful not to cut into it.
Step 3: Cut off the white box in the center of the mouth, which will help you align the tattoo on your face.
Step 4: Make sure that skin is clean and free of any oil, dirt, makeup or hair.
Step 5: Peel plastic off from the tattoo to expose the sticky under part.
Step 6:  Open your mouth and line up the tattoo against it so that the open center part is in line with the open mouth.
Step 7: Press the tattoo down firmly on skin. After securing tattoo in place, wet the paper using a wet sponge. Wet everywhere except lower lip. Saturate with water everywhere at a gradual pace.
Step 8: Finally press down the sponge at the lower lip area and keep it without moving for 10 seconds. Peel away paper slowly. Wet your finger with water and press out any air bubbles in the tattoo. Complete your look by applying additional makeup around the tattoo.

How Do I Remove
Saturate the tattoo application with baby oil or rubbing alcohol. After 10 seconds, rub away using a cotton ball. Another method is to remove from dry skin using pieces of transparent tape.

How Do I Apply
Use a cotton swab, fingers or sponge for application.

How Do I Remove
Remove by washing off with soap and water.