Prosthetics
Product Info

How Do I Apply
Step 1: First hold the prosthetic over the area to see the best and most realistic place for them.

Step 2: Brush on spirit gum on the places where tips will touch the skin. You can also apply spirit gum directly on the skin. The spirit gum will have the best stickiness if you use your finger to move the gum up and down a few times.

Step 3: Place the prosthetic on the area and press into place. If necessary, the edges can be trimmed to create a better fit.

How Do I Remove
Take a small brush or cotton swab and put a small amount of remover under the edges of the prosthetic. After prosthetic are off the applied area, remove any leftover adhesive by rubbing more remover into the area. Rinse off the skin with warm water and a washcloth.

To Use Again: Gently clean and dry the prosthetic and store away from direct sunlight.

Zombie Rot

How Do I Apply
Step 1: Pour rot into a cup. Mix with hot water to required consistency (applesauce consistency is recommended).

Step 2: Test that the mixture is not too hot. Then apply on skin with the stick provided.

Step 3: Roughen up the application using the stick or a stipple sponge before the rot gets dry.

Step 4: Apply the moss on the rot while it is still gooey. The moss will stay when the rot dries.

Step 5: Flesh latex (sold separately) can be used for longer wear.

Step 6: Blood FX or Extra makeup (sold separately) can be used for extra effects.

How Do I Remove
Wipe off any excess blood using warm water and a towel. Using a swab apply a small amount of adhesive remover under the edges of the rot and peel off the rot. Extra care should be taken to not let the remover get into the eyes. Remove residues using additional remover. Rinse the skin with warm water and towel.

Storing: After proper removal, clean the rot with soap and water. Alcohol can also be used for cleaning the rot. Dry and store away from sunlight for reusing.

How Do I Apply
Step 1: Pour burn scar into a cup. Mix with hot water to required consistency (applesauce consistency is recommended).

Step 2: Test that the mixture is not too hot. Then apply on skin with the stick provided.

Step 3: Roughen up the application using the stick or a stipple sponge before the scar gets dry.

Step 4: Apply blood gel (sold separately) on scar while it is still gooey.

Step 5: Flesh latex (sold separately) can be used for longer wear.

Step 6: Blood FX or Extra makeup (sold separately) can be used for extra effects.

How Do I Remove
Wipe off any excess blood using warm water and a towel. Using a swab apply a small amount of adhesive remover under the edges of the scar and peel off the scar. Extra care should be taken to not let the remover get into the eyes. Remove residues using additional remover. Rinse the skin with warm water and towel.

Storing: After proper removal, clean the scar with soap and water. Alcohol can also be used for cleaning the scar. Dry and store away from sunlight for reusing.

How Do I Apply
Brush a small amount of Body Glue onto both the gem and the skin, allow the glue to dry until clear, then adhere the gem to skin.

How Do I Remove
Remove Pros-Aide Body Glue with alcohol or oily products. Only use synthetic brushes to apply Body Glue because it will ruin natural brushes.

Do not let Glitter Tattoo Glue freeze, it will permanently solidify.